Troubleshooting Guides: 201–300
- Baxter SIGMA Spectrum Infusion Pump - Error: 112 Pulse dmnd too low
- Baxter SIGMA Spectrum Infusion Pump - Error: 114 Sensor disparity (slow)
- Baxter SIGMA Spectrum Infusion Pump - Error: 115 Sensor disparity (fast)
- Baxter SIGMA Spectrum Infusion Pump - Error: 116 Motor without PWM
- Baxter SIGMA Spectrum Infusion Pump - Error: 117 PWM MAX
- Baxter SIGMA Spectrum Infusion Pump - Error: 210 SPI PIC Timeout
- Baxter SIGMA Spectrum Infusion Pump - Error: 212 Sensor Task Timeout
- Baxter SIGMA Spectrum Infusion Pump - Error: 213 Battery Task Timeout
- Baxter SIGMA Spectrum Infusion Pump - Error: 240 Key Buffer is Full
- Baxter SIGMA Spectrum Infusion Pump - Error: 300 Fail to enable US sensor
- Baxter SIGMA Spectrum Infusion Pump - Error: 301 US upper avg high
- Baxter SIGMA Spectrum Infusion Pump - Error: 302 US lower avg high
- Baxter SIGMA Spectrum Infusion Pump - Error: 303 Bad upper US rdg
- Baxter SIGMA Spectrum Infusion Pump - Error: 304 Bad Lower US rdg
- Baxter SIGMA Spectrum Infusion Pump - Error: 305 DS rdng out of range (low)
- Baxter SIGMA Spectrum Infusion Pump - Error: 306 DS rdng out of range (high)
- Baxter SIGMA Spectrum Infusion Pump - Error: 309 No-tube rdg too high
- Baxter SIGMA Spectrum Infusion Pump - Error: 314 DS no-tube elevated
- Baxter SIGMA Spectrum Infusion Pump - Error: 320 Latch Switch Error
- Baxter SIGMA Spectrum Infusion Pump - Error: 321 Link Switch error (up)
- Baxter SIGMA Spectrum Infusion Pump - Error: 322 Link Switch Error (low)
- Baxter SIGMA Spectrum Infusion Pump - Error: 345 Thermistor Disparity
- Baxter SIGMA Spectrum Infusion Pump - Error: 347 Check Battery
- Baxter SIGMA Spectrum Infusion Pump – Air-in-Line Alarms
- Baxter SIGMA Spectrum Infusion Pump – Battery Won’t Hold Charge / Won’t Power On
- Baxter SIGMA Spectrum Infusion Pump – Keypad / Screen Not Responding
- Baxter SIGMA Spectrum Infusion Pump – Occlusion Alarm / Will Not Start Infusion
- Baxter Spectrum IQ Infusion Pump - Air-in-Line False Alarms
- Baxter Spectrum IQ Infusion Pump - Alarm Speaker or Audible Alarm Failure
- Baxter Spectrum IQ Infusion Pump - Battery Not Charging or Short Runtime
- Baxter Spectrum IQ Infusion Pump - Charging Dock Communication Errors
- Baxter Spectrum IQ Infusion Pump - Door, Latch, or Administration Set Loading Error
- Baxter Spectrum IQ Infusion Pump - Drug Library Sync Failure
- Baxter Spectrum IQ Infusion Pump - EMR Auto-Programming or Auto-Documentation Failure
- Baxter Spectrum IQ Infusion Pump - Flow Rate Accuracy or Under-Delivery Complaint
- Baxter Spectrum IQ Infusion Pump - Infusion History, Event Log, or Data Export Failure
- Baxter Spectrum IQ Infusion Pump - Keypad/Button Failure
- Baxter Spectrum IQ Infusion Pump - Network Disconnects
- Baxter Spectrum IQ Infusion Pump - Pump Will Not Start Infusion
- Baxter Spectrum IQ Infusion Pump - Software Freeze, Reboot Loop, or Startup Failure
- Baxter Spectrum IQ Infusion Pump - Time, Date, or Configuration Synchronization Failure
- Baxter Spectrum IQ Infusion Pump - Upstream or Downstream Occlusion Alarm
- BD Alaris Infusion Pump - Cassette / IV Set Not Recognized
- BD Alaris Infusion Pump - Channel Module Not Recognized by PC Unit
- BD Alaris Infusion Pump - Error: 120.4310 Low voltage on 24V supply line
- BD Alaris Infusion Pump - Error: 120.4320 High voltage on 24V supply line
- BD Alaris Infusion Pump - Error: 120.4330 Low voltage on 5V supply line
- BD Alaris Infusion Pump - Error: 120.4340 High voltage on 5V supply line
- BD Alaris Infusion Pump - Error: 120.4510 Battery missing or disconnected during use
- BD Alaris Infusion Pump - Error: 120.4520 Battery did not respond appropriately to precharge current
- BD Alaris Infusion Pump - Error: 120.4620 Battery voltage too low when charging
- BD Alaris Infusion Pump - Error: 120.4630 Battery voltage too high
- BD Alaris Infusion Pump - Error: 222.4010 High infusion rate detected
- BD Alaris Infusion Pump - Error: 222.4020 Low infusion rate detected
- BD Alaris Infusion Pump - Error: 222.4030 Motor stall detected
- BD Alaris Infusion Pump - Error: 222.4040 Encoder out of sync with motor pulses
- BD Alaris Infusion Pump - Error: 222.4050 Excessive air-in-line detected
- BD Alaris Infusion Pump - Error: 222.4060 Over-infusion state detected (infusion past VTBI limit)
- BD Alaris Infusion Pump - Error: 222.4180 Improper door and/or flow stop state detected during infusion
- BD Alaris Infusion Pump - Error: 222.4200 Motor activity detected when motor should be idle
- BD Alaris Infusion Pump - Error: 240.4140 Bottle-Side Pressure Sensor Voltage Too Low
- BD Alaris Infusion Pump - Error: 240.4150 Bottle-Side Pressure Sensor Voltage too high
- BD Alaris Infusion Pump - Error: 241.4140 Patient-Side Pressure Sensor Voltage too low
- BD Alaris Infusion Pump - Error: 241.4150 Patient-Side Pressure Sensor Voltage too high
- BD Alaris Infusion Pump - Error: 242.4010 Fluid delivery mechanism turning too quickly (infusion rate high)
- BD Alaris Infusion Pump - Error: 242.4020 Fluid delivery mechanism turning too quickly (infusion rate low)
- BD Alaris Infusion Pump - Error: 242.4030 Motor stall detected
- BD Alaris Infusion Pump - Error: 243.4070 Failed self test
- BD Alaris Infusion Pump - Error: 244.3020 Clamp read CLOSED when it should be OPEN (unexpected state)
- BD Alaris Infusion Pump - Error: 245.3020 Door sensor read CLOSED when it should be OPEN
- BD Alaris Infusion Pump - Error: 350.6630 Pressure not tracked by force sensor
- BD Alaris Infusion Pump - Error: 351.6760 Module not calibrated (calibration flag not set)
- BD Alaris Infusion Pump - Error: 352.6640 Output is zero or outside acceptable range
- BD Alaris Infusion Pump - Error: 353.6650 Linear Sensor output is zero or outside acceptable range
- BD Alaris Infusion Pump - Guardrails Drug Library Not Loading or Corrupted
- BD Alaris Infusion Pump - Network Connectivity Failure (Wireless / Ethernet)
- BD Alaris Infusion Pump - Occlusion Alarms
- BD Alaris Infusion Pump - Pump Reboots or Freezes During Operation
- BD Alaris Infusion Pump - “System Error” or Unrecoverable Fault Codes
- BD Alaris Infusion Pump – Air-in-Line Alarms
- BD Alaris Infusion Pump – Battery Won’t Hold Charge / Won’t Power On
- BD Alaris Infusion Pump – Communication Failure with EMR / Guardrails Library
- BD Alaris Infusion Pump – Door Won’t Latch / “Close Door” Error
- BD Alaris Infusion Pump – Flow Rate Inaccurate or Infusion Not Delivering
- BD Alaris Infusion Pump – Keypad / Buttons Not Responding
- BD Alaris Infusion Pump – Pump Fails Self-Test During Power-On
- BD Alaris Infusion Pump – Upstream Occlusion / Check IV Set Alarms
- BD BACTEC FX Blood Culture System - Analyzer Will Not Power On or Complete Initialization
- BD BACTEC FX Blood Culture System - Barcode, LIS, or Network Communication Fails
- BD BACTEC FX Blood Culture System - Calibration Fails or Will Not Complete
- BD BACTEC FX Blood Culture System - Clot, Bubble, or Sample-Volume Error Repeats
- BD BACTEC FX Blood Culture System - Probe, Pipettor, or Aspiration Error Occurs
- BD BACTEC FX Blood Culture System - Quality-Control Results Are Out of Range
- BD BACTEC FX Blood Culture System - Reagent Is Not Recognized or Inventory Is Incorrect
- BD BACTEC FX Blood Culture System - Result Is Delayed, Missing, or Inconsistent
- BD BACTEC FX Blood Culture System - Sample, Rack, or Carrier Is Not Detected
- BD BACTEC FX Blood Culture System - Wash, Waste, or Fluidics System Fault Occurs
- BD BBS Revolution Bladder Scanner - Automatic bladder detection failure
- BD BBS Revolution Bladder Scanner - Battery / pole-mount power issue
- BD BBS Revolution Bladder Scanner - Console touchscreen or display failure